Device Recall System 98/98XT, CS100/CS100i, CS300 IntraAortic Balloon Pump

System 98 - Part Numbers 0998-00-0446-xx, 0998-UC-0446-xx;  System 98XT - Part numbers 0998-00-0479-xx, 0998-UC-0479-xx ;  CS100i- Part numbers 0998-UC-0446Hxx, 0998-UC-0479Hxx;  CS100 - Part numbers 0998-00-3013-xx, 0998-UC-3013-xx;  CS300 - Part numbers 0998-00-3023-xx, 0998-UC-3023-xx

General Hospital and Personal Use Devices

2

No

Worldwide Distribution

Datascope/ Maquet IABPs. System 98/98XT Intra-Aortic Balloon Pump; CS100/CS100i Intra-Aortic Balloon Pump; CS300 Intra-Aortic Balloon Pump; || Manufactured by Datascope Corp., 1300 MacArthur Blvd., Mahwah, NJ 07430 || The Intra-Aortic Balloon Pump (IABP) is an electromechanical system used to inflate and deflate intra-aortic balloon. It provides temporary support to the left ventricle via the principle of counterpulsion. The IABP is placed in the descending aorta, via the principe of counterpulsation. The IABP is placed in the descending aorta, just distal to the left subclavian artery. Once the balloon is positioned, the IABP is adjusted to trigger in synchrony with the ECG or arterial pressure waveform to ensure that inflation and deflation occur at the appropriate points during the cardiac cycle. The CS300 has the additional capability to automatically calibrate a fiber-optic pressure sensor placed in the tip of the intra-aortic balloon. The IABP will recalibrate every 2 hours or sooner should the patient or environmental conditions change. The target populations are adult and pediatric. The IABP is intended for use in the health care facility setting.