Rappel de Allura Xper R9 and Azurion R1.1 systems with the QA Basic Measurement tool

Selon Department of Health, Therapeutic Goods Administration, ce/cet/cette rappel concerne un dispositif en/au/aux/à Australia qui a été fabriqué par Philips Electronics Australia Ltd.

Qu'est-ce que c'est?

Une correction ou un retrait opéré par un fabricant afin de répondre à un problème causé par un dispositif médical. Les rappels surviennent lorsqu'un dispositif médical est défectueux, lorsqu'il pourrait poser un risque pour la santé, ou les deux à la fois.

En savoir plus sur les données ici
  • Type d'événement
    Recall
  • ID de l'événement
    RC-2017-RN-01162-1
  • Classe de risque de l'événement
    Class II
  • Date de mise en oeuvre de l'événement
    2017-09-06
  • Pays de l'événement
  • Source de l'événement
    DHTGA
  • URL de la source de l'événement
  • Notes / Alertes
    Australian data is current through July 2018. All of the data comes from the Australian Therapeutic Goods Administration, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of recall data from the U.S. and Australia.
  • Notes supplémentaires dans les données
  • Cause
    Philips has identified when using the downscale option, the measurements performed with the allura r9 or azurion r1.1 systems (using qa basic measurement tool) will not be correctly exported to the external dicom destination. the difference between the original & exported measurements can vary, and the distance value after export is factor 1 to 4 smaller than the original. the difference will depend on the acquired image & used archive settings. if the measurement is re-performed at the external dicom destination, the result will also be incorrect unless a recalibration of the image is executed. if these exported downscaled images are used during/in preparation of a procedure, the incorrect measurement values could result in the selection of an incorrectly sized device. the same applies if a measurement is re-performed at the external dicom destination without executing a recalibration of the image.To date philips is not aware of any injuries that may have occurred due to this issue.
  • Action
    1. The Downscale option should be disabled in all Export protocols until Philips corrects this issue. 2. Distribute the notice to all users of the device. 3. Complete the supplied response form and return it to Philips. 4. The problem will be resolved by a software update, which is expected to be available by the end of 2017. 5. Philips representatives will notify users when the software update is available for installation. 6. In the interim, a similar notice will be provided along with newly manufactured devices shipped for use.

Device

  • Modèle / numéro de série
    Allura Xper R9 and Azurion R1.1 systems with the QA Basic Measurement toolProduct Names: Allura Xper R9 7M20, Azurion 7M12, Azurion 7M20ARTG Number: 225815
  • Manufacturer

Manufacturer

  • Société-mère du fabricant (2017)
  • Source
    DHTGA