Events

Rappel de IMMULITE® 2000 IMMULITE® 2000 XPi Immunoassay System. An in vitro diagnostic medical device (IVD)Reagent Carousel Temperature Sensor Printed Circuit Board (PCB)

Selon Department of Health, Therapeutic Goods Administration, ce/cet/cette rappel concerne un dispositif en/au/aux/à Australia qui a été fabriqué par Siemens Ltd Diagnostics Division.

Qu'est-ce que c'est?

Une correction ou un retrait opéré par un fabricant afin de répondre à un problème causé par un dispositif médical. Les rappels surviennent lorsqu'un dispositif médical est défectueux, lorsqu'il pourrait poser un risque pour la santé, ou les deux à la fois.

En savoir plus sur les données ici
  • Type d'événement
    Recall
  • ID de l'événement
    RC-2015-RN-00369-1
  • Classe de risque de l'événement
    Class III
  • Date de mise en oeuvre de l'événement
    2015-04-28
  • Pays de l'événement
    Australia
  • Source de l'événement
    DHTGA
  • URL de la source de l'événement
    https://apps.tga.gov.au/Prod/sara/arn-detail.aspx?k=RC-2015-RN-00369-1
  • Notes / Alertes
    Australian data is current through July 2018. All of the data comes from the Australian Therapeutic Goods Administration, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of recall data from the U.S. and Australia.
  • Notes supplémentaires dans les données
  • Cause
    Siemens has identified that some systems may have been manufactured with a defective reagent carousel temperature sensor pcb or a defective pcb assembly.The affected temperature sensor boards may cause icing on the reagent carousel casting. if there is icing within the reagent carousel, there is a potential for the reagent carousel to encounter a mechanical jam which will stop the system from processing samples and will generate errors.Siemens has determined that the reagent contents do not freeze when the incorrectly assembled pcb assembly is installed in the reagent carousel assembly. testing shows that the reagent liquid temperature may fall below 4 °c but not to the point when freezing or slush was observed. the reagents are not compromised; therefore, assay performance is not affected.There is not likely to be any risk to health. the system will stop processing samples if a mechanical jam occurs.
  • Action
    Siemens will inspect all systems for the defect on the next service visit. In the interim users are requested to contact Siemens Technical Support should an Error [465] or [302] occur. This action has been closed-out on 03/03/2016.

Device

IMMULITE® 2000 IMMULITE® 2000 XPi Immunoassay System. An in vitro diagnostic medical device (IVD)...
  • Modèle / numéro de série
    IMMULITE® 2000 IMMULITE® 2000 XPi Immunoassay System. An in vitro diagnostic medical device (IVD)Reagent Carousel Temperature Sensor Printed Circuit Board (PCB) Assembly ARTG number: 174399
  • Manufacturer
    Siemens Ltd Diagnostics Division

Manufacturer

Siemens Ltd Diagnostics Division
  • Société-mère du fabricant (2017)
    Siemens AG
  • Source
    DHTGA