Events

Rappel de IntelliVue MX40 Software Versions: B.00.x and B.01.x

Selon Department of Health, Therapeutic Goods Administration, ce/cet/cette rappel concerne un dispositif en/au/aux/à Australia qui a été fabriqué par Philips Electronics Australia Ltd.

Qu'est-ce que c'est?

Une correction ou un retrait opéré par un fabricant afin de répondre à un problème causé par un dispositif médical. Les rappels surviennent lorsqu'un dispositif médical est défectueux, lorsqu'il pourrait poser un risque pour la santé, ou les deux à la fois.

En savoir plus sur les données ici
  • Type d'événement
    Recall
  • ID de l'événement
    RC-2014-RN-00676-1
  • Classe de risque de l'événement
    Class I
  • Date de mise en oeuvre de l'événement
    2014-06-25
  • Pays de l'événement
    Australia
  • Source de l'événement
    DHTGA
  • URL de la source de l'événement
    https://apps.tga.gov.au/Prod/sara/arn-detail.aspx?k=RC-2014-RN-00676-1
  • Notes / Alertes
    Australian data is current through July 2018. All of the data comes from the Australian Therapeutic Goods Administration, except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of recall data from the U.S. and Australia.
  • Notes supplémentaires dans les données
  • Cause
    The alarm pause time is user selectable from 1 to 3 minutes, with a default of 2 minutes, when operating the mx40 with the piic ix.When the following specific conditions are met, the alarm pause time does not automatically restart when it reaches its selected time limit:- the pause alarms configuration is enabled in the non-default setting of both red and yellow level alarms;- the mx40 is selected for the non-default setting of monitor mode;- the pause alarms is initiated to pause an active alarm or to maintain a short ‘non-alarm’ state while in the patient’s vicinity; and- an alarm condition occurs during the pause alarms time.The mx40 will continue to display “alarms paused: 0:00” and the piic ix will display “alarms paused” until the pause alarms feature is disabled manually.
  • Action
    Philips is advising their customers that the following two items must be configured when using the MX40 with the IntelliVue Information Center iX: 1. Utilise the default state of Pause Alarms at Yellow only, which disables the ability to Pause/Suspend all Red level alarms. 2. Utilise the default state of Remote Suspend Alarms as off, which disables the use of the Pause Alarm feature of the MX40 device. Philips will implement a software update to correct the issue. This action has been closed-out on 12/02/2016.

Device

IntelliVue MX40 Software Versions: B.00.x and B.01.x
  • Modèle / numéro de série
    IntelliVue MX40 Software Versions: B.00.x and B.01.xPart Numbers: 865350 and 865352ARTG Number: 99204
  • Manufacturer
    Philips Electronics Australia Ltd

Manufacturer

Philips Electronics Australia Ltd
  • Société-mère du fabricant (2017)
    Philips
  • Source
    DHTGA