Alerte De Sécurité sur NOxBOXi inhaled Nitric Oxide Delivery and Monitoring Device

Selon Department of Health, ce/cet/cette alerte de sécurité concerne un dispositif en/au/aux/à Hong Kong qui a été fabriqué par Bedfont Scientific.

Qu'est-ce que c'est?

Les alertes fournissent des informations importantes et des recommandations concernant les dispositifs médicaux. Le fait qu'une alerte soit émise ne signifie pas nécessairement qu'un dispositif soit dangereux. Les alertes de sécurité, qui sont envoyées tant aux travailleurs du secteur médical qu'aux utilisateurs de ces dispositifs, peuvent inclure des rappels. Elles peuvent être rédigées par des fabricants mais aussi par des autorités en charge de la santé.

En savoir plus sur les données ici
  • Type d'événement
    Safety alert
  • Date
    2014-05-07
  • Date de publication de l'événement
    2014-05-07
  • Pays de l'événement
  • Source de l'événement
    DH
  • URL de la source de l'événement
  • Notes / Alertes
    Hong Kong data is current through September 2018. All of the data comes from the Department of Health (Hong Kong), except for the categories Manufacturer Parent Company and Product Classification.
    The Parent Company and the Product Classification were added by ICIJ.
    The parent company information is based on 2017 public records. The device classification information comes from FDA’s Product Classification by Review Panel, based on matches of data from the U.S. and Hong Kong.
  • Notes supplémentaires dans les données
    Medical Device Safety Alert
  • Cause
    Medical device safety alert: bedfont scientific noxboxi inhaled nitric oxide delivery and monitoring device the medicines and healthcare products regulatory agency (mhra), united kingdom posted a field safety notice concerning noxboxi inhaled nitric oxide delivery and monitoring device, manufactured by bedfont scientific. a conflict has been identified between the noxboxi regulators output and the cylinder status symbols shown on-screen. due to tolerances on the regulator output, some units may show a cylinder status as empty (red) when in fact they are full and some may show as full (green) when they are empty. with the latter a cylinder could empty without the operators knowledge, the system will switch over to the auxiliary/back-up cylinder, however when that is exhausted and system would then alarm “supply critical”. if another supply of gas is not available, sudden cessation of the therapy could occur. for patients dependent on this therapy, this failure could result in serious injury or death of the patient. the manufacturer advises affected users not to use the cylinder status icons on screen to determine gas supply. furthermore, the manufacturer is evaluating a firmware fix whereby the cylinder status tolerances are widened in order to eradicate the risk of cylinders showing as empty when they are full and full when they are empty. the regulators have a gas pressure gauge built into them which shows the cylinder status and this must be used only until a firmware fix is validated. for details, please refer to the following link:http://www.Mhra.Gov.Uk/safetyinformation/safetywarningsalertsandrecalls/fieldsafetynotices/con409264 if you are in possession of the affected product, please contact your supplier for necessary actions. posted on 07 may 2014.

Device

  • Modèle / numéro de série
  • Description du dispositif
    Medical Device Safety Alert: Bedfont Scientific NOxBOXi inhaled Nitric Oxide Delivery and Monitoring Device
  • Manufacturer

Manufacturer