Events

Rappel de Baxter AP II Pain Management System

Selon U.S. Food and Drug Administration, ce/cet/cette rappel concerne un dispositif en/au/aux/à United States qui a été fabriqué par Baxter Healthcare Corp..

Qu'est-ce que c'est?

Une correction ou un retrait opéré par un fabricant afin de répondre à un problème causé par un dispositif médical. Les rappels surviennent lorsqu'un dispositif médical est défectueux, lorsqu'il pourrait poser un risque pour la santé, ou les deux à la fois.

En savoir plus sur les données ici
  • Type d'événement
    Recall
  • ID de l'événement
    33916
  • Classe de risque de l'événement
    Class 2
  • Numéro de l'événement
    Z-0550-06
  • Date de mise en oeuvre de l'événement
    2005-10-27
  • Date de publication de l'événement
    2006-04-26
  • Statut de l'événement
    Terminated
  • Pays de l'événement
    United States
  • Date de fin de l'événement
    2008-11-03
  • Source de l'événement
    USFDA
  • URL de la source de l'événement
    https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfres/res.cfm?id=42740
  • Notes / Alertes
    U.S. data is current through June 2018. All of the data comes from the U.S. Food and Drug Administration, except for the category Manufacturer Parent Company.
    The Parent Company was added by ICIJ.
    The parent company information is based on 2017 public records.
  • Notes supplémentaires dans les données
    Pump, Infusion, Pca - Product Code MEA
  • Cause
    When infusing at flow rates below 0.5 ml/hr, the upstream occlusion alarm of the pumps may not detect the occlusion.
  • Action
    Baxter sent Urgent Device Correction letters dated 10/27/05 to the direct accounts on the same date via first class mail. The letters informed the accounts of the potential for air to migrate through the silicone-pumping segment of the sets, which may result in air reaching the patient. Baxter recommended that the users of the I-Pump to enable the upstream occlusion sensor of the pump or to use sets containing air-elimination filters if the occlusion sensor is disabled or otherwise not activated. Baxter also recommended that for delivery routes other than epidural and subcutaneous at flow rates below 0.5 mL/hr, infusions should always be performed using a set containing an air eliminating filter (product codes 2L3513, 2L3520, 2L3523, 2L3525, 2L3526 and 2L3527). For users of the APII Pump Baxter recommended that all infusions on the APII, for delivery routes other than epidural and subcutaneous, should be performed using a set containing and air-eliminating filter. Baxter sets not containing an air-eliminating filter (product codes 2L3510 and 2L3511) should not be used with the APII device, and should not be used with the I-Pump when infusing at rates less than 0.5 mL/hr. Any questions were directed to the Center for One Baxter at 1-800-422-9837. Baxter sent a follow-up recall letter to the accounts on 6/21/06, providing them with an Operator's Manual Addendum for the AP II Infusion Pump, with the warning to use only Baxter sets with air-eliminating filters with the AP II pump to avoid undetected air-in-line at low flow rates. The accounts were requested to complete and fax back to Baxter the enclosed reply form, indicating the number of additional copies of the addendum needed.

Device

Baxter AP II Pain Management System
  • Modèle / numéro de série
    All serial numbers
  • Classification du dispositif
    General Hospital and Personal Use Devices
  • Classe de dispositif
    2
  • Dispositif implanté ?
    No
  • Distribution
    Nationwide, including Puerto Rico, and internationally to Canada, Chile and China
  • Description du dispositif
    AP II Pain Management System infusion pump, product codes 2L3105, 2L3105K, 2L3105R, 2L3105T and 2L3105W; Baxter Healthcare Corporation, Deerfield, IL 60015
  • Manufacturer
    Baxter Healthcare Corp.

Manufacturer

Baxter Healthcare Corp.
  • Adresse du fabricant
    Baxter Healthcare Corp., Rt. 120 & Wilson Rd, Round Lake IL 60073
  • Source
    USFDA