Events

Rappel de Device Recall MEDTECH ROSA Spine 1.0.2

Selon U.S. Food and Drug Administration, ce/cet/cette rappel concerne un dispositif en/au/aux/à United States qui a été fabriqué par Zimmer Biomet, Inc..

Qu'est-ce que c'est?

Une correction ou un retrait opéré par un fabricant afin de répondre à un problème causé par un dispositif médical. Les rappels surviennent lorsqu'un dispositif médical est défectueux, lorsqu'il pourrait poser un risque pour la santé, ou les deux à la fois.

En savoir plus sur les données ici
  • Type d'événement
    Recall
  • ID de l'événement
    76820
  • Classe de risque de l'événement
    Class 2
  • Numéro de l'événement
    Z-1755-2017
  • Date de mise en oeuvre de l'événement
    2017-02-27
  • Date de publication de l'événement
    2017-03-27
  • Statut de l'événement
    Open, Classified
  • Pays de l'événement
    United States
  • Source de l'événement
    USFDA
  • URL de la source de l'événement
    https://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfres/res.cfm?id=154305
  • Notes / Alertes
    U.S. data is current through June 2018. All of the data comes from the U.S. Food and Drug Administration, except for the category Manufacturer Parent Company.
    The Parent Company was added by ICIJ.
    The parent company information is based on 2017 public records.
  • Notes supplémentaires dans les données
    Orthopedic stereotaxic instrument - Product Code OLO
  • Cause
    Unapproved change made by the supplier.
  • Action
    Zimmer Biomet sent an Urgent Medical Device Recall Correction letter on February 27, 2017,to all affected customers informing them of the following: Description of the issue: A robot arm file parameter linked to arm calibration was modified by the robot arm supplier without notification to MEDTECH. As a result, once the robot arm is on trajectory, an error leading to a device reboot may decrease the devices applicative accuracy, one of the essential performance requirements, to a level above the specification. This may happen after a shutdown of the device, (voluntary or due to an error), without a return of the robot arm position to a Parking position. In the worst case scenario, this may cause an incorrect positioning of the instruments by the ROSA devices. If this is not detected by the user this could ultimately lead to ineffective treatment, serious injury or even death of the patient. MEDTECH did not record, in normal conditions of use, any customer reports linked to this issue. Required actions by users: Pending the implementation of a permanent correction, MEDTECH is recommending the following actions to all users of the ROSA device: 1- After a shutdown of the device, (voluntary or due to an error), without a return of the robot arm in Parking position, ROSA device must be switched off with the I/O switch button on the device rear panel. 2- Restart the device after 10 seconds, and after full extinction of emergency button light. If the Reset button at the device rear panel is red, restart the ROSA PC by pushing the Reset button. 3- If robot position is NOT ¿ Home ¿, load patient folder and main software interface will appear on the screen. a. Go to the Guidance menu, select trajectories and follow instructions. b. Click on Start button. c. Start recovery procedure and follow all instructions displayed on the screen until robot arm position is Home. d. Close the patient folder e. Click on Exit and follow all ins

Device

Device Recall MEDTECH ROSA Spine 1.0.2
  • Modèle / numéro de série
    Serial #'s: SP16008
  • Classification du dispositif
    Orthopedic Devices
  • Classe de dispositif
    2
  • Dispositif implanté ?
    No
  • Distribution
    Nationwide Distribution to CA, FL, IL, KY, MA, MN, NC, NY, OH, PA, and District of Columbia.
  • Description du dispositif
    MEDTECH ROSA Spine 1.0.2 || The device is intended for the spatial positioning and orientation of instrument holders or tool guides to be used by neurosurgeons to guide standard neurosurgical instruments during spine surgery. Guidance is based on an intra-operative plan developed with three dimensional imaging software provided that the required fiducial markers and rigid patient anatomy can be identified on 3D CT scans. The device is indicated for the placement of pedicle screws in lumbar vertebrae with a posterior approach.
  • Manufacturer
    Zimmer Biomet, Inc.

Manufacturer

Zimmer Biomet, Inc.
  • Adresse du fabricant
    Zimmer Biomet, Inc., 1800 W Center St, Warsaw IN 46580-2304
  • Société-mère du fabricant (2017)
    Zimmer Biomet Holdings
  • Commentaire du fabricant
    “The safety of patients has always been, and continues to be, Zimmer Biomet’s top priority and it is our honor to be a leader in this industry for the past 90 years,” Zimmer Biomet told ICIJ in a statement. “We adhere to strict regulatory standards, and work closely with the FDA and all applicable regulatory agencies in each of our regions as part of our commitment to operating a first-rate quality management system across our global manufacturing network. The company added that it is focused on staying at the forefront of innovation and doing right by the millions of patients who rely on the company’s products.
  • Source
    USFDA